HALLS AND ARENAS

Rorbit
Indoor Ultra-Density.

Four streams on every band. Our most powerful access point: 4×4 on 2.4, 5 and 6 GHz with 12 antennas and dual 10G uplinks, for convention halls, airports and flagship venues.

Mira AI4×4 MIMO10G
Access points Indoor Ultra-Density
21.5 Gbpstri-band Wi-Fi 7
1,536devices
2× 10Gfibre + copper uplinks
LIVE STATUS

Know how every AP is doing, without a ladder.

Each access point reports to Rorbit all the time: devices, heat, uptime. Mira reads it for you, and Locate makes the right one blink.

Hall A-07Online
Clients now
124
Temperature
46°C
Uptime
21 days
Firmware
Rorbit OS
Mira: Running well. Busiest around 1 pm, and 5 GHz is carrying most devices. Nothing to fix.
◎ LocateThe light on the AP blinks so the installer finds the right one.

Where it fits

Thousands of devices
01 / 04

Convention halls

Thousands of devices in one space.

  • Thousands of devices
  • Booth by booth
  • Mira flags the busiest AP
Gate 12 · boarding
02 / 04

Airports and terminals

Dense, mobile crowds all day.

  • Dense, moving crowds
  • All day, every gate
  • 10G uplinks
Seat-level capacity
03 / 04

Arenas

Seat-level capacity from fewer APs.

  • Seat-level capacity
  • Fewer APs over the seats
  • 4×4 on every band
Headroom for ten years
04 / 04

Flagship hotels

Headroom for the next ten years.

  • Headroom for ten years
  • Tri-band Wi-Fi 7
  • One cloud for the whole hotel
NEXT-GENERATION WI-FI 7

A faster lane for every device.

Quad-core ARM A73
Qualcomm Wi-Fi 7 platform
802.11be
The full Wi-Fi 7 standard
320 MHz
Ultra-wide channels on 6 GHz
PoE++ or DC
Two ways to power it

Four upgrades over Wi-Fi 6

4K-QAM
More data in every signal
+20%
peak speed
4096-QAM fits 4× more points than Wi-Fi 6's 1024-QAM, so each transmission carries more.
Wi-Fi 6 · 1024-QAM Wi-Fi 7 · 4096-QAM
Multi-Link Operation
All three bands at once
3×
reliability
Wi-Fi 6 keeps a device on one band. Wi-Fi 7 combines 2.4, 5 and 6 GHz and switches away from a busy one.
2.4 GHz5 GHz6 GHz Wi-Fi 6: one band Wi-Fi 7: all three
Multi-RU
No idle airtime
↓
latency
Small and large slots are packed together, so many users share the channel without waiting.
Idle slots wasted Every slot used
Preamble puncturing
Works around interference
↑
stability
A noisy slice of the channel is skipped instead of dropping the whole channel.
Whole channel lost Noisy slice skipped interference
Gains need Wi-Fi 7 phones and laptops. Real speeds depend on the room and the devices. 6 GHz use follows each country's rules.
Full 10G, fibre or copper
A 10G SFP+ slot takes fibre straight to the AP, so it can sit far from the comms room. A 10G copper port and a 2.5G port cover the rest, plus USB 2.0.
2.5G10GUSB 2.010G SFP+
Three bands, three clean lanes
max per band
Three independent radios that don't interfere. The extra 6 GHz band is the cleanest, so busy rooms stay fast.
6 GHz
11,528 Mbps
5 GHz
8,464 Mbps
2.4 GHz
1,376 Mbps
12 FEMs, 12 antennas
12 independent amplifiers and 12 dual-polarised antennas: a stronger signal, better reception from far devices, and fewer APs for the same floor.
12+12
×××× 3 ordinary APs, overlapping 1 Ultra-Density
INDOOR ULTRA-DENSITY
Built for the busiest rooms.
Scroll to look inside.
INSIDE
Four parts, built to be swapped in minutes.
Next, the underside.
SIDE
Cool under full load.
Cool air drawn in, warm air pushed out through vents all the way round.
UNDERSIDE
Full 10G, fibre or copper.
10G SFP+ · 10G copper · 2.5G · USB 2.0 · DC in
ON THE CEILING
Up it goes, Wi-Fi for the whole hall.
Thousands of devices, all served from a few APs overhead.
1Vented coverStatus light and airflow along the edge
Wi-Fi 7 radio board12 antennas on every side · Rorbit OS2
3Back housingClips the board in place, vents heat
Mounting bracketKeyhole slots for ceiling or wall4
2.5G10GUSBSFP+DC

Runs Rorbit OS.

Mira AI explains it
Ask why a room is slow and get the device and the fix in plain words.
Heat you can see
Every AP reports its temperature; Mira warns before summer does damage.
Updates that can't brick
Signed firmware, staged rollout, automatic rollback.
Legal in every country
Set the site's country once; channels and power follow its rules.
Adopts itself
Power it on and it shows up in Rorbit. One click puts it in the right site with its settings.
Open firmware
Rorbit OS is built on OpenWrt, so every AP keeps getting new features.

Tech specs

* Coverage is a typical figure in open space. Walls, glass and interference reduce it; a site survey gives the real number for your building.

Download spec sheet
Wi-FiWi-Fi 7, tri-band 2.4 + 5 + 6 GHz
Streams4×4 on each band
Max data rate21.5 Gbps (BE22000 class: 11,528 + 8,464 + 1,376 Mbps)
Channel widthUp to 320 MHz
CoverageUp to about 200 m² · plan by users, not area *
DevicesUp to 1,536
Antenna12 internal, >130° each
Uplink1× 10G SFP+, 1× 10G RJ45
PowerPoE++ (802.3bt) or DC
Size220 × 220 × 42 mm
TemperatureOn-board, reported to Rorbit
Wi-Fi 7 features4096-QAM, MLO, MRU, preamble puncturing
Extra ports1× 2.5G RJ45, 1× USB

The rest of the range

Compare all
Indoor In-Wall
Hotel rooms
Indoor Ceiling
Corridors, offices and cafés
Indoor High-Density
Lobbies and ballrooms
WANSYSLAN2.4G5GRST · Eth/PoENO OPEN
Outdoor Omni
Pools and campuses
Indoor In-Wall Lite
Budget rooms
Outdoor High-Density
Stadiums and campuses
Indoor Ceiling Pro
Corridors and galleries
Outdoor Long-Range
Beaches, car parks and long runs

Bring your network into orbit.

Hardware plus one simple per-AP subscription. No licence keys.

Book a demoRequest samples